Homepage Watermakers Find a Dealer Prestigious Yachtbuilders About Sea Recovery Events / Boat Shows News / Press Releases

AQUA MATIC XL- SPECIFICATIONS

Performance Rated Performance / Product Water Produced: +-15% at 820 PSI / 56.5 bar, 77°F / 25°C & 35,000 PPM TDS typical sea water

Production
Model # Per Hour Per Day
2200
2600
2800
3400
92 Gal / 347 L
92 Gal / 347 L
117 Gal / 442 L
142 Gal / 536 L
42200 Gal / 8328 L
2600 Gal / 9842 L
2800 Gal / 10599 L
3400 Gal / 12870 L

Salt Rejection
(Chloride Ion)
Minimum 99.2%, Average 99.4%

Product Water Temperature Ambient to feed water temperature

Pressure Adjustment Automatically controlled

Salinity Monitoring Automatic electronic monitoring. Temperature compensated with the digital continuous readout. The salinity monitoring components of the system give a continuous TDS readout in ppm (parts per million), are temperature compensated, and of a fail safe design.

Salinity Range Designed for seawater use up to 50,000 PPM TDS (NaCl) (typical seawater salinity is 35,000 ppm)

Temperature Range Max. 122°F / 50°C, Min. 33°F / .5°C

System Feed Water Flow: 4.5 gpm / 17 lpm (depending on system)

Reverse Osmosis Membrane Selected High Rejection/High Yield aromatic tri-polyamid, thin film composite, spiral wound, single pass, high rejection reverse osmosis membrane element.

Chlorine Tolerance 0.1 PPM

pH Range 3-11 (typical seawater pH is 8)

System Pressure Feed Water: Maximum 35 psi / 2.41 bar / 2.46 Kg/cm2

System Operation Seawater nominal 820 psi / 56.5 bar / 57.66 Kg/cm2

Weight
Model Number
Compact
Modular
2200
2600
2800
3400
413 lbs / 187 kg
413 lbs / 187 kg
428 lbs / 194 kg
428 lbs / 194 kg
390 lbs / 176 kg
400 lbs / 181 kg
415 lbs / 188 kg
432 lbs / 196 kg
 

External Installation
Water Connections
Pipe sizes to be supplied by the installer for connection of the SRC supplied components. The below pipe threads are all US Standard.
 
Feed Inlet: 3/4" FNPT Female National Pipe Thread
Brine Discharge: 3/4" FNPT Female National Pipe Thread
Product: 3/8" MNPT Male National Pipe Thread

Electrical Requirements (NOA = Normal Operating Amps; SUC = Start Up Current)
Booster Pump Motor Phase Voltage VAC Hz Normal Operating Amps Start Up Current
1.5/2 Three 220/380//230/460 50//60 5.2/2.6//5.8/2.9 24/16//27/14
*For Single Phase please consult factory    *Other voltage available upon request

 
Circuit Breaker Amp Rating High Pressure Pump / Motor Hz Phase Normal Operating Amps Circuit Breaker Amp
2200 - 3400 GPD 5 HP 50 3 40 15.6 / 7.8 80/60
2200 - 3400 GPD 5 HP 60 3 13.9 / 13.4 / 6.7 80/60